Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| CamelBak_Forge_cup_holder_for_Honda_CRV_2006.stl | Mount / bracket | 74.3 KB STL | Slice file | Slice file | Slice file | Apply double-sided tape to the base for extra grip |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
CamelBak Forge cup holder for Honda CRV 2006
Shared by
3DPrintedCarPartDescription
My CamelBak Forge drink bottle did not fit in the cup holders of my Honda CRV 2006, leading to it wobbling about all over the place and falling out. This print inserts into the original cup holder in the centre console. This can be printed in whatever filament you choose. I used PLA, and this has been very resilient for the past couple of years in a sub tropical climate. PLA has not deformed given the temperatures the inside of the car reaches in summer when closed up outside. Supports are recommended when printing in the original orientation. I applied some double sided tape to the base area, just to hold it down, as the grip exerted on the bottle may cause the print to come loose from the original mug holder. See a video of it in action at https://youtu.be/TZePqxjwyjE
Compatible Cars
Originally published on thingiverse.com by George Coburn (intmanofawesome) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
