Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Lh_cupholder.stl | Mount / bracket | 1.3 MB STL | Slice file | Slice file | Slice file | Apply strips of felt around the outside walls of the part for a snug fit |
| RH_cupholder.stl | Mount / bracket | 1.3 MB STL | Slice file | Slice file | Slice file | Apply strips of felt around the outside walls of the part for a snug fit |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Nalgene/Hydroflask Cupholder Adaptor for CR-V
Shared by
3DPrintedCarPartDescription
Most vehicle cupholders don't fit Nalgenes or Hydroflasks, so here's an adaptor to fix it! Designed to perfectly fit into the the cupholder for a 2019 Honda CR-V. After printing, apply strips of felt around the outside walls of the part that is actually fitting into the cupholder to get a snug fit, and to prevent the plastic from rattling around. This was designed as two pieces to hold two bottles, but either piece fits in the glovebox for when you're driving alone and don't want all the extra space taken up. Or you can just print one of these if you don't have/need any friends, like me! A lip/raise is built into the bottom surface to contour to the side walls of the CR-V console that stick up.
Compatible Cars
Originally published on thingiverse.com by Dylan Mandelbaum (dylanmandelbaum) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
