Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
camper warning plate holder (Citroen Jumper)
Shared by
3DPrintedCarPartDescription
This warning sign holder is my 1st contribution to Thingiverse. So please be patient with my input. This is a holding construction for a warning sign (50x50) which is attributable for European Camper Vans and required to indicate load (like bikes) e.g. at a rear bike holder of a Camper Van. The holder consists out of two lower chevrons (left and right), a top holder, and a small locker. All is mounted to the inner frame of the left rear door by small SPAX screws (3.0 x 12mm). I added double sided tape to the holders before fixing them to the door.
Compatible Cars
Originally published on thingiverse.com by bernd matejek (matejek) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
