Based on 40% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 40% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
CAMPYENNE - PORSCHE Cayenne roof-rack Leveling wedges
Shared by
3DPrintedCarPartDescription
The Porsche roof-racks are quite nice design wise and strong enough for a roof-top-tent, but thats it. Mounting stuff on this racks especially a big heavy roof-top-tent is...interesting. So we decided to make a frame to mount it under the Tent. To have a form fitting connection between frame and roof racks I decided to print some wedges. Easier said than done - there was a lot of trial and error to find the right shape. One file is for the left an one for the right side. Gave them a lot of infill 40 % and 8 layers on top, bottom an outer shell to make them sturdy.
Compatible Cars
Originally published on thingiverse.com by Johannes Wingert (jowi_92) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
