Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| CE3_CupHolder_bmwE46.stl | Mount / bracket | 185.5 KB STL | 15g $0.36 | 16g $0.39 | 35g $0.85 | Print with a raft for better adhesion if desired |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
can and cup holder - 320 for BMW e46
Shared by
3DPrintedCarPartDescription
A simple can Holder for the BMW E46. I was inspired by the cup holder from leRob*, but faced some problems: it only worked to Red Bull, Burn and those kind of cans. So I made a version to fit cans of Coca Cola, Pepsi, Fanta, etc. I little bit bigger ones. Personally, I like to print always with rafts. I recommend it, but it does not matter. Also you can print with higher infill. *If you are looking for this kind of can holder, check his design: https://www.thingiverse.com/thing:2004707
Compatible Cars
Originally published on thingiverse.com by Domingo Garcia (domin10) · License: CC0
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
