cap for sliding door rail maintenance holes Mercedes Sprinter - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

cap for sliding door rail maintenance holes Mercedes Sprinter

0 downloads33 views0 likes

Download at source

Shared by

Alfred

Verified

Description

Catalog note: cap for sliding door rail maintenance holes Mercedes Sprinter is a 3D-printable car-part listing indexed for classified fitment Mercedes Sprinter. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.