Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Car Air Vent Mount

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Explanation It's a base for your desired mount so feel free to add anything that can hold your smartphone in an appropriated way. e.g.: I taped a strong magnet to the clamp and inserted a metal plate between my smartphone and the cover. Even on rough streets the clamp and my smartphone doesn't move a bit. Originally designed for the Golf 7 with a thight fit. The Air-Vent behind the clamp can still be moved. How-To-Insert First you align the top piece (not the round side) and "clip" it to the top of the vent. Then you just have to bend the clamp until it can be inserted on the bottom of the vent.