Car fastener clip for 6.2mm hole - image

Files (1)

clipv3.STL

STL

188.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
clipv3.STL	Clip	188.1 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent part warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

Car fastener clip for 6.2mm hole

0 downloads55 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Needed a new plastic fastener for my rear lift gate on my Hummer H2 (GM). The hole is 6.2mm. This should also work on 6mm. Pretty common size. Might be better printed with flexible filament but PLA should work as well. You will need supports.

Compatible Cars

HUMMER H2

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Daniel Kester (DrDaniel) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.