Files (1)

Phone_mount_car.stl

STL

408.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Phone_mount_car.stl	Mount / bracket	408.5 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented correctly to minimize supports, but verify in your slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Car phone mount for CD slot

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I needed a place to put my phone, when I use it as a navigation system for the car. I kept the size minimal, to reduce printing time and also to make the mount less visually dominant when it's not used. The phone still holds very secure in the mount, which slides into the CD slot (so finally there is a new purpose for that, as well). The mount is designed to fit a Huawei Nova 2 with a protective case around it but I guess other phones might work as well. The design can be printed standing up without supports. Enjoy! If you want to see what else I do, you can check out my website: https://www.fromheadtohand.com