Files (3)

Hook_v2.STL

STL

23.1 KB

Hook.STL

STL

23.1 KB

Hook_v3.STL

STL

23.3 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Hook_v2.STL	Accessory piece	23.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Hook.STL	Accessory piece	23.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Hook_v3.STL	Accessory piece	23.3 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Car Seat Hook

0 downloads166 views0 likes

Shared by

Michael Chen

Verified

Description

This is my first PETG print! I designed a light duty hook that hangs from the headrest rod in my car. V2 is 10mm shorter on the rod end. Designed V3 to have a deeper hook because masks were falling off too easily.