Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Head_Rest_Eye_v1.0.stl | Primary model | 1.1 MB STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Ensure a brim or raft is used for stability if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Headrest Eye / curry hook / seat hanger thing!
Shared by
Michael ChenDescription
A very simple, but effective headrest hook thingy.. I made these for my Defender seats to hold a cargo net for holding my coat and junk, as well as keeping the dog out of the front seats! They use a couple of cheap aluminium carabiners as the real hooky bit.. They fit standard 12.5mm headrest support rods, simply pull the headrest up and off, slip 'em on, slide the rest back into place and job done! The photo says more than I can put here!
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
