CB Antenna Mount for Jeep Wrangler JK - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

CB Antenna Mount for Jeep Wrangler JK

0 downloads181 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a bracket I made on CNC plasma for a 1/2" CB antenna stud to mount the antenna on a Garvin Adventure Rack's windshield hoop. It is held on by a 5/16" U-bolt. The windshield is tilted at 25 degrees, so cutting this part and putting a 90 degree bend in it puts the antenna vertical. I cut this out of a piece of 3" x 8" x 3/16" mild steel, overkill for this application. 1/8" would be fine.