Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Jeep accessory bar mount

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

The "Arizona Rocky Road" bar is a common accessory mounting solution for Jeeps (TJ at least). The bar measures 1.5" by 0.75" and would be easy to replicate yourself. These clamps provide a way to non-destructively mount things to the bar. The generic one provides a single bolt through the top. Print a clamp and a support block. The support block is a little smaller than the clamp to provide some room to squeeze the clamp down on the bar. All hardware is M4. I'm also including a modified version that is wider for more stability, which also has mounting ears that match up with Kenwood D700 and D710 radio brackets. This lets you mount a radio head directly without the funky faceted base plate they include. Print the clamp on its side, but orient the support block with the hole vertical for the cleanest fit. Supports not required for PLA, but probably necessary for ABS. I also added a little hocky stick tape on the inside of the clamp to give a tighter and softer fit.