Chevrolet Truck Backup Camera Mounting Bracket - image

Files (1)

Backup_Camera_Mount_2.stl

STL

74.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Backup_Camera_Mount_2.stl	Mount / bracket	74.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Rear Bumper

Chevrolet Truck Backup Camera Mounting Bracket

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I needed a better way to mount my aftermarket backup camera was dying that I was replacing with another aftermarket backup camera with the same dimensions. I imagine the size is pretty close on all of these cheaper chinese models that are sold by the ton on Amazon. Roughly just under an inch square. I printed it using PLA (with plans to get some black PETG in the future) at 0.2 resolution, 20% infil, brim or no brim on a Prusa MK3S.