Chevy Colorado Bison Bumper Rear Light - image

Files (2)

bisRearLight.stl

STL

73.9 KB

bisRearLight_mirror.stl

STL

73.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bisRearLight.stl	Printable file	73.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
bisRearLight_mirror.stl	Printable file	73.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Rear Bumper

Chevy Colorado Bison Bumper Rear Light

0 downloads57 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

AEV makes a bracket to support rear lights in the bumper but it doesn't really work with less expensive options like nilight. This bracket works with Nilight 3-Inch 42W LED Cubes and align perfectly with the holes. These bracket adapters have been tested off road in Moab. Requires 1/4" and 1/2" hardware.