Chevy Avalanche Reverse Lights 9005 Bulb Adapter - image

Files (1)

Bulb_Adapter.stl

STL

177.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 40%	100% solid	Recommendation
Bulb_Adapter.stl	Primary model	177.7 KB STL	Slice file	Slice file	Slice file	Ensure a dust and water resistive seal by using the gasket from the factory bulb holder

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Chevy Avalanche Reverse Lights 9005 Bulb Adapter

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Created an adapter to fit 9005 bulbs for the reverse lights on my 2003 Chevy Avalanche. The gasket from the factory bulb holder should be fitted on the new adapter. The adapter should create a dust and water resistive seal. I built the 9005 slots based on the led bulbs I ordered. The mounting tabs on 9005 bulbs do not seem to be modified for other 9005 bulbs. I used cheap 9005 led bulbs from Aliexpress. NO CANBUS + 6000k + 9005/HB3 https://www.aliexpress.com/item/4000134087947.html For wiring an adapter harness can be made from a 9005 socket and 3157 male adapter. Links below: https://www.amazon.com/dp/B0859Z2T9D https://www.amazon.com/Adapter-Wiring-Harness-Headlight-Retrofit/dp/B076FMCR2K I would recommend printing in PETG or ABS for better heat resistance especially if you live in a hot climate.