Chevy Bolt Charge Port Light Cover - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Chevy Bolt Charge Port Light Cover

0 downloads45 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a simple cover to diffuse the light from an LED light strip that has been fitted into the charge port of a Chevy Bolt. The cover is slightly larger than the opening, but the plastic will bend into shape which helps hold the cover in place. I used a white PLA, but clear could probably also be used. You could also use a white led strip and print the cover in whatever color you want your charge port light to be. I am assuming that all Chevy Bolt charge ports are very close to the same dimensions, but I cannot guarantee that it will fit your car. If it is too small or too large, you can probably just scale it in your slicer to get the dimensions where you need them. Best of luck and happy printing!