Chevy Colorado/GMC Canyon Above Stereo Phone Mount-Remix - image

Files (1)

GMC_Phone_2.stl

STL

75.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
GMC_Phone_2.stl	Primary model	75.3 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for better adhesion if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Chevy Colorado/GMC Canyon Above Stereo Phone Mount-Remix

0 downloads229 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a remix of lilmikey's post. I found in portrait mode while plugged in, I had to keep the phone high in the bracket as it was too far back from the front of the dash. Moved the upper bracket forward to accommodate the charging cable. This mount works in the dashboard and tray contours of the 2015-2022 Chevy Colorado and GMC Canyon. Use a good double-sided tape on the back of the mount in the tray area and in the front of the mount on the stereo fascia - you need to stick anything to the leather. I used the iBolt mini ball mount: https://smile.amazon.com/gp/product/B01EVRS7P2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1