Files (3)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Colorado_dash_mound.stl | Printable file | 109.1 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
| Colorado_dash_mound_2.stl | Printable file | 421.8 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
| Colorado_dash_mound_w_ball.stl | Printable file | 53.5 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Chevy Colorado/GMC Canyon phone mount
Shared by
3DPrintedCarPartDescription
I am new at 3D designing and printing. I made the prototype with square edges and printed it in PLA and the fit was good in my 2022 Chevrolet Colorado. I made 1/4-20 threads to screw on a pre-made phone mount ball. The one with the ball has a 17mm ball for standard phone mounts. Once I get my PETG in I will print the second threaded one and post it.
Compatible Cars
Originally published on thingiverse.com by James Vanderhoff (jvanderhoff1152) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
