Files (2)

5_speed_chevy_shifter_knob.stl

STL

621.9 KB

sm465_chevy_shifter_knob.stl

STL

779.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

27g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.66

Filament only at roughly $24/kg PETG / ASA

Print time

47m–1.3h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
5_speed_chevy_shifter_knob.stl	Printable file	621.9 KB STL	23g $0.55	25g $0.60	55g $1.32	Ensure a secure fit on the 14 mm nut
sm465_chevy_shifter_knob.stl	Printable file	779.5 KB STL	25g $0.60	27g $0.66	60g $1.44	Ensure a secure fit on the 14 mm nut

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Chevy shifter knob

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a gear shifter I made in tinkercad for my Dads 1973 Chevy K20. It is designed to fit on a 14 mm nut and thread onto the stick. It is a sm465 gear selection set up. See my GMC Shifter design here! https://www.thingiverse.com/thing:4286083