Chevy Spark EV Dash Speaker Pods - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Chevy Spark EV Dash Speaker Pods

0 downloads45 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This design fits Kicker 43CSC54 5.25" speakers in the dash of 2014-2016 Chevrolet Spark EVs. It is non-destructive to the car as there is no permanent modification necessary to the car and installation is fully reversible. The speaker pod mounts to the dash using the two existing screw holes used for the stock speakers, and the speaker and grill mount to the pod. NOTE: final trimming of the pod is necessary to fit the dash perfectly, and if using the screws included with the speakers, they must be shortened to approximately 3/4" in length so that they don't impact/interfere with the dash. Additionally, mounting the speakers to the installed pods requires a "stubby" right-angle screw driver to fit between the windshield and the speaker, such as the one available here: https://www.harborfreight.com/hand-tools/screwdrivers/8-piece-right-angle-screwdriver-92630.html