Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Chrysler Sunroof Clip Thingy
Shared by
3DPrintedCarPartDescription
My buddy needed this part to fix his sunroof on his Chrysler 200 S. I'm sure with cars being the way that they are, that the part would probably work to fix other similar vehicles as well. There are two designs--one that very closely mirrors the original part but has a weird bottom and may be hard to print. These are labeled "weird bottom". There is also a "flat bottom" version which is much easier to print and seems to work perfectly fine. I just printed these at 100% and they seemed to work great. You'll probably have better luck with ABS due to them being right in direct sun, but PLA will work fine for a while. I didn't actually do the installation on these parts, so the left and right might be flip flopped... sorry.
Compatible Cars
Originally published on thingiverse.com by Michael Levenick (levenimc) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
