Files (3)

c3_arm.stl

STL

33.5 KB

c3_mount.stl

STL

341.7 KB

c3_phone_mount.stl

STL

89.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 30%	100% solid	Recommendation
c3_arm.stl	Printable file	33.5 KB STL	Slice file	Slice file	Slice file	Use a 0.4mm nozzle or similar for optimal detail and strength balance
c3_mount.stl	Mount / bracket	341.7 KB STL	Slice file	Slice file	Slice file	Use a 0.4mm nozzle or similar for optimal detail and strength balance
c3_phone_mount.stl	Mount / bracket	89.2 KB STL	Slice file	Slice file	Slice file	Use a 0.4mm nozzle or similar for optimal detail and strength balance

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

citroen C3 phone mount

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Phone mount for Citroen C3 car. Compatibility (what is was tested with): - Huawei: P20, P20 lite, P20 pro, P10 lite - Iphone: 6, 7, 8,... I guess it will work with many other phones but I just didn't test it. You will need one screw and My settings for the print: - PLA - 0.4mm nozzle - Anet A8 - 30 % infill - Support is needed Good luck:) Victor.