Files (2)

Phone_Base.stl

STL

52.4 KB

Vent_Mount.stl

STL

37.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Phone_Base.stl	Printable file	52.4 KB STL	Slice file	Slice file	Slice file	Ensure the vents are closed facing down for secure mounting
Vent_Mount.stl	Mount / bracket	37.4 KB STL	Slice file	Slice file	Slice file	Ensure the vents are closed facing down for secure mounting

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Citroen Phone Mount

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a non intrusive way to mount your phone on the vents of Citroen cars that have the round vents like Citroen C3. The vents have to be closed facing down so that it won't fall once it is mounted. It also locks in place so that you can remove your phone without removing it from the vent. Designed for phones with maximum width of 80mm. There are two pieces that can be merged together either with a M3 screw or with glue. I've printed it in PLA, but most likely you will need to use something that can withstand the heat coming out from the ventilation.