Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Citroen C3 Picasso doorcap

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I lost, somehow, the cap from the door handle of my Citroen C3 Picasso. They are absolute expensive to replace, if you can find them at all. I only need the cap with the keyhole, not a complete set. A fimo clay solution worked fine for some years, but cracked eventually. I needed another diy solution. I tried scanning a cap without keyhole, but this was a drag. So this is my first Fusion 360 project. Since I never ventured beyond Tinkercad, this had quite a steep learning curve for me. Took some instruction video's to get a hang for the basics. After some practices it took me about an hour to model it from scratch. It took me many hours to do the preliminary practices. I finished this project within a week, so I'm pretty pleased.