Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Citroen/Peugeot armrest clip
Shared by
3DPrintedCarPartDescription
Armrest plastic clip. (and FYI, first custom I upload on thingiverse, yepeeee). This is the clip used to lock armrest in a Citroen C5 or Peugeot 407 as well. If you have found this STL, this is most likely because you broke yours when leaning towards passenger seat and pushing too much / putting too much weight on your arm rest that got its clip broken because of that, isn't it?:) Other side needs to be flatten first with a file, then this clip can be glued with epoxy for instance. One of the best way to glue it is actually to insert the clip into the female slot, then add the glue and keep the arm rest pushing against it (just put some weight on the armrest). This clip could potentially be compatible for other vehicles from PSA group. Hope that helps.
Compatible Cars
Originally published on thingiverse.com by Benoit Godissart (Darw1n) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
