Files (3)

COBB_90_deg_BRKT.stl

STL

355.1 KB

COBB_v3_AP_Horizontal_RT_ANGLE_BALL.stl

STL

3.0 MB

COBB_v3_AP_Verticle_RT_ANGLE_BALL.stl

STL

1.9 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
COBB_90_deg_BRKT.stl	Printable file	355.1 KB STL	Slice file	Slice file	Slice file	Use double-sided mounting tape for installation.
COBB_v3_AP_Horizontal_RT_ANGLE_BALL.stl	Printable file	3.0 MB STL	Slice file	Slice file	Slice file	Use double-sided mounting tape for installation.
COBB_v3_AP_Verticle_RT_ANGLE_BALL.stl	Printable file	1.9 MB STL	Slice file	Slice file	Slice file	Use double-sided mounting tape for installation.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

COBB AP V3 More mount options

0 downloads59 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Couldn't find any angled mounts for my Cobb APv3 so I decided to make my own! The 90 degree bracket is probably the easiest solution however is limited to flat areas, the ball joints offer the original mounting capabilities of the v3 mount but with a right angle! Bracket is intended to be used with double sided mounting tape. Ball Joints may need some filing and a bit of finessing with support removal. Enjoy!