SUBARU WRX STI AOS CATCH CAN FULLY PRINTABLE - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 40%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

SUBARU WRX STI AOS CATCH CAN FULLY PRINTABLE

0 downloads45 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

this is my first upload im a total noob to 3d design this is a design based on a part i already fabricate and the design works very well i have not used a 3d printed version yet so use at your own risk! i have scaled everything to fit pretty well ive included test items for you to print and check the scaling of the threaded parts if you choose to print this id appreciate if you leave my logos on it if your going to print it and sell you absolutely must keep my logos on it thats all i ask! everything should be easily printed without supports id suggest going with a little lower then normal extruder temp and run cooling at 100% so the threaded parts come out nice. i added a version of the top and bottom half with supports for threads please print it. do NOT add support in your slicer you dont want a bunch of extra junk inside the can that could come loose and end up in your engine. I would also suggest using orings on all the fittings to insure an air tight seal i dont want to hear any blown ringland stories lol lol check out rocksteadytuning.com for all my wrx and sti parts! 12/31/17 update added top and bottom of catch can with supports for the threaded bungs i test printed it and the support snaps right out as planned and the fittings thread in perfectly now! also added file with the can assembled with some simple directions embossed on it! added a new pcv adapter with built in supports just print it with a brim and when its done twist the the support piece and pull it out! all the pieces and parts have been test printed i would just strongly suggest printing all the pieces one at a time. do not try to print the assembled cans it will not work. 1/2/18 updated the bracket to add some strength and made the fittings a little larger to better fit 1/2 inch hose. 1/21/20 this thing could be a lot better leave a comment if youd like to see me redesign this! we made a few of these in petg they were pretty cool but petg starts to deform pretty quick when its warm id suggest using abs or even better would be some kind of nylon g or nylon carbon fiber. and please sub my youtube! https://www.youtube.com/rstchan ill be posting 3d printer stuff along with some fun videos and fabrication were building some bmx frames from scratch so check it out!