Files (5)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Basemount.stl | Mount / bracket | 345.5 KB STL | 18g $0.44 | 20g $0.48 | 44g $1.05 | Use a brim or raft for the Basemount part to improve adhesion |
| Card-Holder-with-mountingholes.stl | Mount / bracket | 306.7 KB STL | 18g $0.42 | 19g $0.46 | 42g $1.01 | Use a brim or raft for the Basemount part to improve adhesion |
| Card-Holder-without-mountingholes.stl | Mount / bracket | 212.4 KB STL | 16g $0.37 | 17g $0.41 | 37g $0.89 | Use a brim or raft for the Basemount part to improve adhesion |
| Screw.stl | Printable file | 528.8 KB STL | 22g $0.52 | 24g $0.56 | 52g $1.24 | Use a brim or raft for the Basemount part to improve adhesion |
| ScrewPlate.stl | Printable file | 151.1 KB STL | 14g $0.33 | 15g $0.36 | 33g $0.79 | Use a brim or raft for the Basemount part to improve adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
coin-, sunglasses-, card- and remote-mount for BMW vehicle
Shared by
3DPrintedCarPartDescription
------ advice: use abs, pla is getting soft during a hot summer day:) -> "curvy" ------- It's a multiplepurpose mount for BMW i3 vehicles the accessory slots. Fits side by side with cupholder, if positioned at the corners it holds: - 3x 1-€-Coin (or similar sized coins) - 1x sunglasses - 1x rectangular thing - for example a garagedoor-remote max Size ~25 mm x 13 mm x 50 mm - that red thing in the rendered pictures. Secured by screw with plate - 1x cardholder - for 3 standard-sized credit/nfc/...-cards (ISO/IEC 7810 ID-1) cardholder comes in two versions. One version ist equipped with frontside mountingholes to attach another cardholder. Cardholders need some force to attach, but stay in place without clue. ----------------------------------------------- BMW i3 Kreditkarten-, Euro-, Sonnenbrille, Garagentoröffner-Halterung für die Zubehör-Steckplätze in der Mittelkonsole. Passt vorne neben den zusätzlichen Becherhalter, wenn man beide in die jeweils äußeren Steckplätze steckt. passt für: - 3x 1-€-Münze, oder ähnliche - 1x Sonnenbrille, zum durch das Loch hängen - 1x Garagentoröffner, bis max. 25 mm x 13 mm x 50 mm. im Renderbild rot, wird mit der Schraube und Plättchen fixiert. - 1x Kartenhalter für 3 Kreditkarten Den Kartenhalter gibt es in einer Version mit zusätzlichen Befestigungen auf der Vorderseite. Damit können mehrere Kartenhalter gestapelt werden. Zum Befestigen einfach die Nasen mit etwas Kraft in die Befestigungslöcher drücken. Hält auch ohne Kleber recht gut - solange man es nicht alle 5 min wieder abmontiert. ---------------------------------------------------- remix of "Sunglass Hook for BMW vehicles" by muddtt used just the lower part to fit into the accessory-ports.
Compatible Cars
Originally published on thingiverse.com by Ma St (Markus_S) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
