posavasos_LogoHONDA.stl

STL

226.4 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
posavasos_LogoHONDA.stl	Primary model	226.4 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

CON LOGO Honda! Civic EK3 Cup Holder Posavasos

0 downloads183 views0 likes

Shared by

Verified

Description

Básicamente es el mismo pero con el logo de Honda ahora añadido en la parte inferior. El logo añade +4CV a los Civic. Es algo que todo el mundo sabe.

Time: 2h

Filament: 50g

Supports: Not needed

Published Feb 14, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.