Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| clip5.stl | Clip | 114.3 KB STL | Slice file | Slice file | Slice file | Ensure proper alignment with the license plate light hole's for accurate positioning |
| mal.stl | Printable file | 55.2 KB STL | Slice file | Slice file | Slice file | Ensure proper alignment with the license plate light hole's for accurate positioning |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Corrado additional brakelight template ( 535 945 131 )
Shared by
3DPrintedCarPartDescription
if you want to add a original VW additional brakelight you can use this template to position it. Template is copy of original hood plate. Align the template using the license plate light hole's. and youre done. I used a Dremel to cut the hole. Clip can be used to mount the brakelight using bolts on the brakelight pushing the clip against the hood.
Compatible Cars
Originally published on thingiverse.com by richard te pas (hendrik6073) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
