VW T5 Bonnet Wind Deflector Clip - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hood

VW T5 Bonnet Wind Deflector Clip

0 downloads147 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is the clips that attaches the wind deflector to the bonnet on a VW T5 or other cars with the same mounts. I had to make new clips for my bonnet wind deflector because most of the original ones broke when I mounted them. Now the rest of them are allso replaced because they didn't last. I first designed the clip "VW_T5_Bonnet_Clip V1.stl" which was as tight the original ones, but they didn't last either. Therefore I designed the "VW_T5_Bonnet_Clip V2.stl". Those are not that tight but they seem to be tight enough and they seem to last. I bouht the "VW T5 TRANSPORTER BONNET WIND DEFLECTOR 10 - 15" from www.vanstyle.co.uk.