Files (4)

Corvette_C5_AirDuct_Left_v2.stl

STL

567.3 KB

Corvette_C5_AirDuct_Right.stl

STL

568.0 KB

CorvetteC5AirductLeft.stl

STL

267.5 KB

CorvetteC5AirductRight.stl

STL

267.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Corvette_C5_AirDuct_Left_v2.stl	Choose left variant	567.3 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Corvette_C5_AirDuct_Right.stl	Choose right variant	568.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
CorvetteC5AirductLeft.stl	Choose left variant	267.5 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
CorvetteC5AirductRight.stl	Choose right variant	267.5 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Fenders

Corvette C5 Air duct fender

0 downloads53 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Nice Air duct for the Corvette C5 97-04. Print with support. Use good quality double adhesive tape or sika kit to mount it in the duct outlet, use a heat gun to make the ABS or PLA bend the shape of the duct outlet. Paint if necessary after printing in your favourite color. If you put one on your own Corvette it would be nice to post a picture of it. Update 12/2017 Used C5 Logo instead of C6 Logo. Update 01/2018 Made the grid 1 mm thicker, right will follow. Update 06/2018 Added duct without C5 logo Thanks to: https://www.thingiverse.com/thing:2012101