Files (6)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| BRACKET.stl | Mount / bracket | 258.3 KB STL | 17g $0.40 | 18g $0.43 | 40g $0.95 | Ensure proper orientation for minimal supports |
| BRACKET.stp | Mount / bracket | 99.3 KB STP | 12g $0.29 | 13g $0.32 | 29g $0.70 | Ensure proper orientation for minimal supports |
| EXPANSION_TANK.stl | Printable file | 1.4 MB STL | 32g $0.78 | 35g $0.84 | 77g $1.85 | Ensure proper orientation for minimal supports |
| EXPANSION_TANK.stp | Printable file | 45.5 KB STP | 10g $0.24 | 11g $0.26 | 24g $0.57 | Ensure proper orientation for minimal supports |
| STRAP.stl | Printable file | 125.9 KB STL | 13g $0.32 | 14g $0.34 | 31g $0.75 | Ensure proper orientation for minimal supports |
| STRAP.stp | Printable file | 55.6 KB STP | 10g $0.25 | 11g $0.27 | 25g $0.60 | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Second Gen. Camaro Expansion Tank Mounting Bracket
Shared by
3DPrintedCarPartDescription
This design will mount a 60s/70s Corvette expansion tank on the passenger side fender, under the hood. The bracket mounts to the existing flat on the fender where the heater hose strap fastened.
Compatible Cars
Originally published on thingiverse.com by Dustin Krug (KrugsKreations) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
