Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| door_trim.STL | Primary model | 187.8 KB STL | Slice file | Slice file | Slice file | Print on top of painters tape or a textured build plate for a finish similar to the original |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Corvette Door trim
Shared by
3DPrintedCarPartDescription
Door trim for a corvette. print on top of painters tape or textured build plate so the finish is close to the same as the original.
Compatible Cars
Originally published on thingiverse.com by Harry Totzke (hairy2015) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
C5 Corvette fuel rail letters 1999-2004
License: CC BY-SA
View & download STL files
Camaro Single Din Radio Bezel
License: CC BY
View & download STL files
2010 Camaro Strut Bushing Cap
License: CC BY-NC
View STL source
Chevrolet Spark molding clip
License: CC BY-SA
View & download STL files
rear door wiper trim for chevrolet captiva
License: CC BY
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
