Files (1)

camaro_plate_single_din.STL

STL

451.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
camaro_plate_single_din.STL	Primary model	451.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Camaro Single Din Radio Bezel

0 downloads51 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Radio bezel for a 82-92 Camaro. Opening in the plate is 180mm x 50mm for a standard single din radio. Some trimming maybe needed to fit your specific radio. 1-31-19 *Found an issue with the uploaded file. Had a bad number on the model that made the opening much greater than 180mm. New file fixes this issue.