Files (2)

cover-lighter-91civic.stl

STL

237.2 KB

Cover_Lighter_Socket_-_Civic_4G_v2.step

STEP

63.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
cover-lighter-91civic.stl	Cover / cap	237.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Cover_Lighter_Socket_-_Civic_4G_v2.step	Cover / cap	63.5 KB STEP	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Cover Lighter Socket - 4G Civic

0 downloads162 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I made a booboo and broker this part on my 4th generation Civic EF. See story from my blog. f3d and step files uploaded for those who wish to make derivatives/remix.