cowboy canteen center console for 2015+ f150 - image

Files (1)

center_console_tray_v1.stl

STL

97.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 60%	100% solid	Recommendation
center_console_tray_v1.stl	Primary model	97.3 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

cowboy canteen center console for 2015+ f150

0 downloads151 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

modified version of the original cowboy canteen but this time with a nice twist for my guys wearing a mustache out there! This fine piece will dual-wield two full cans plus a Firehouse Mustache Wax can (only the best). same rules apply here, i recommend 60% infill to maintain structure during extreme interior temps in hotter climates.