Files (7)

10c.stl

STL

70.0 KB

1c.stl

STL

35.3 KB

25c.stl

STL

94.0 KB

5c.stl

STL

59.3 KB

rail.stl

STL

11.6 KB

tray.stl

STL

141.6 KB

tube.stl

STL

11.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

7 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
10c.stl	Printable file	70.0 KB STL	Slice file	Slice file	Slice file	Print coin holders standing up for better results
1c.stl	Printable file	35.3 KB STL	Slice file	Slice file	Slice file	Print coin holders standing up for better results
25c.stl	Printable file	94.0 KB STL	Slice file	Slice file	Slice file	Print coin holders standing up for better results
5c.stl	Printable file	59.3 KB STL	Slice file	Slice file	Slice file	Print coin holders standing up for better results
rail.stl	Accessory piece	11.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
tray.stl	Printable file	141.6 KB STL	Slice file	Slice file	Slice file	Print coin holders standing up for better results
tube.stl	Accessory piece	11.4 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

F150 center console stuff

0 downloads165 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

F150 center console stuff I have a 2019 F150. The center console has a sliding tray that rides on some hangar rails, like in a file cabinet drawer. I designed these things to act as a sliding tray stop. These stops are 120mm's long and fit into the hangar rails. There are little slide mount tabs so I can attach different things to these rails. I have coin holders, a tube, and a tray. I can fit four coin holders into the 120 mm space. I printed one each of the coin holders but you have the freedom to print all 25's or all 1's, whatever you want. Go crazy! Let me know if you have any requests. I ran out of ideas. The tray is 120mm's long. The tube is just an enclosed 25c holder. I can keep a couple crystal light drink mixes in there, toothpicks, etc. Printed in ABS 25%.2 I tried printing the coin holders laying down but they print better for me standing up. Printed these all in black ABS, it blends in but it sure does not photograph very well.