Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| protege_red_bull_spacer.stl | Primary model | 772.8 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for better adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
cup holder spacer
Shared by
3DPrintedCarPartDescription
A cupholder spacer for your mazda protege or protege5. I designed this for my 03 protege5, but it should fit all protege models 99-03. It may fit other cars as well but I'm not sure. I designed this to fit 12 oz red bull cans but it should keep the 8.4 oz cans from falling as well. Inside diameter is 58mm Outside diameter starts at 80mm and tapers to the bottom at 72mm.
Compatible Cars
This part is marked as universal-fit. Confirm dimensions, mounting points, and clearances on your vehicle before printing.
Originally published on thingiverse.com by Greg Francisco (Theothergreg) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
