Files (2)

Jetta-Cupholder.stl

STL

169.7 KB

Jetta-Cupholder2.stl

STL

158.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Jetta-Cupholder.stl	Mount / bracket	169.7 KB STL	Slice file	Slice file	Slice file	Ensure proper fit in the center console slot
Jetta-Cupholder2.stl	Mount / bracket	158.5 KB STL	Slice file	Slice file	Slice file	Ensure proper fit in the center console slot

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Cupholder - 99 Jetta

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Updated: Found an issue with the holder being thin enough that it would bend in heat of the car. I made it thicker and uploaded it as Version2. This is a cupholder replacement for the pop out cupholder in the center console. The one that was in there had broken, and all parts had come out. The only thing left was the small spring parts in the back. I decided to replace it with something that I could print. The printed version would great, it is tight in the slot and holds even a large drink (although I probably wouldn't recommend most large cups) and it will come out and can be dropped into the glove box or out of the way if not being used.