Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Cupholder Conversion Kit for E36 BMW's
Shared by
3DPrintedCarPartDescription
The factory cupholders on the 1992-1999 BMW 3-series (E36) are too narrow to be usable with modern cups. Cups don't sit level in the cupholders, causing the cup to tip over, making the cupholder unusable. This conversion kit fixes that problem, and should fit any E36 including the 318i, 325i, 328i, and M3. It makes the cupholders shallower, but affords a flat surface for cups and cans to sit on. You may want to print these parts in ABS to keep them from deforming on hot days. The insert has never deformed on me with PLA, but the ring has. It doesn't seem to bother the center console plastic if it deforms. To install the parts: 1. Pop the cupholder module out of the center console 2. Remove the spring-loaded components from the cup holder 3. Reinstall the cupholder module 4. Install the insert and ring.
Compatible Cars
Originally published on thingiverse.com by (PotatoFi) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
