Cupholder Insert Blank for Renault Zoe (22 kW & ZE40) - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Cupholder Insert Blank for Renault Zoe (22 kW & ZE40)

0 downloads50 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a blank design from which to design a custom cupholder insert for the Renault Zoe (22 kW and 41 kW versions). As the stock cupholders are very small, I designed an insert that fits snuggly into those but can accommodate a much larger cup instead. The space is limited due to the narrow distance between the parking brake and the seat, but this design can easily fit a cup up to 77-78 mm in diameter. For best results print upside down with supports enabled (once a cup design is inserted).