Files (2)

Duster_2_Phone_Mount.stl

STL

18.6 KB

Duster_2_Phone_Mount_Brace.stl

STL

684 B

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Duster_2_Phone_Mount.stl	Mount / bracket	18.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Duster_2_Phone_Mount_Brace.stl	Mount / bracket	684 B STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Dacia Duster 2 Phone Mount

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I printed the brodit style mount from the Nibirul thing but I found that if I applied a even a little pressure it popped off the dash. I remedied it by copying the design from scratch in Tinkercad then adding an cross brace that is inserted after the holder is in place. That way it cannot come off the dash at all, it is super secure.