Dacia Duster Phone Holder Support - image

Files (1)

duster_holder_proto.stl

STL

536.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
duster_holder_proto.stl	Mount / bracket	536.3 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports in your slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Dacia Duster Phone Holder Support

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My Dacia Duster first generation (2. version facelift from 2013) has a round shape air vents that are not perfect for an universal phone holder that is normally intended to be hooked into the standard rectangle-shaped mesh of the air vent. I designed a model that can be attached into the front box (above two front round air vents). It is a "small fake rectangle air vent mesh" that can be then used to place the universal phone holder that you can buy everywhere (e.g. aliexpress or your local store). Material I have used to print the model is black PETG. You might use something else (e.g. PLA) if you want. How to place the holder is described in photos. It is very easy. You do not have to use any tools just your hands. If you have any questions or just want to share your experience, comment the model. Thanks.