Dacia_double_cable_lower_grille.stl

STL

27.3 KB

Dacia_double_cable_navi_grille.stl

STL

25.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

10g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.23

Filament only at roughly $24/kg PETG / ASA

Print time

16m–27m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Dacia_double_cable_lower_grille.stl	Printable file	27.3 KB STL	9g $0.21	10g $0.23	21g $0.50	Ensure a brim or raft is used for stability if necessary
Dacia_double_cable_navi_grille.stl	Printable file	25.5 KB STL	9g $0.21	9g $0.23	21g $0.50	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dacia Logan / Sandero II Medianav - double cable holder / grabber

0 downloads28 views0 likes

Shared by

Verified

Description

Thanks to the original creator. I updated the model so that it can hold two cables.

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Onescu Cristian (crisonescu) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.