Files (4)

console_inf.STL

STL

267.8 KB

console_sup.STL

STL

250.5 KB

habillage_inf.STL

STL

25.7 KB

habillage_sup.STL

STL

68.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

4 model files

Typical selected file

18g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.44

Filament only at roughly $24/kg PETG / ASA

Print time

31m–52m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
console_inf.STL	Printable file	267.8 KB STL	17g $0.40	18g $0.44	40g $0.96	Ensure proper fitment by checking the creator's print settings and dimensions on the source page.
console_sup.STL	Printable file	250.5 KB STL	16g $0.40	18g $0.43	39g $0.94	Ensure proper fitment by checking the creator's print settings and dimensions on the source page.
habillage_inf.STL	Printable file	25.7 KB STL	9g $0.21	9g $0.23	21g $0.50	Ensure proper fitment by checking the creator's print settings and dimensions on the source page.
habillage_sup.STL	Printable file	68.0 KB STL	11g $0.26	12g $0.29	26g $0.63	Ensure proper fitment by checking the creator's print settings and dimensions on the source page.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Dacia spring console centrale

0 downloads122 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Console centrale pour Dacia Spring. Catalog note: Dacia spring console centrale is a 3D-printable car-part listing indexed for classified fitment Dacia. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.