Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Fach_mittelarmlehne_Focus3.STL | Primary model | 1.1 MB STL | Slice file | Slice file | Slice file | Print with 3 top layers for a smooth surface |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Focus 2012 Tray for middle console
Shared by
3DPrintedCarPartDescription
This is a tray for the centerconsole of a Ford Focus 2012. I removed the "Ford" logo in the STL because i dont want to get in trouble with the trademark. On the other hand the logo is due to the swung font not easy to print. I did many tests but everytime it looked bad. A just plain surface looks even better. Print it in 0.3mm resolution and with support. Takes about 5 hours to print. Print with 3 top layers for a good looking surface.
Compatible Cars
Originally published on thingiverse.com by Mario (Poenni) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
