infill for FORD FOCUS MK2 CENTER CONSOLE STORAGE - image

Files (2)

ford_.stl

STL

793.7 KB

ford_focus_infill.stl

STL

217.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 25%	100% solid	Recommendation
ford_.stl	Printable file	793.7 KB STL	Slice file	Slice file	Slice file	Use a high heat-resistant filament due to the high temperatures inside the car
ford_focus_infill.stl	Printable file	217.4 KB STL	Slice file	Slice file	Slice file	Use a high heat-resistant filament due to the high temperatures inside the car

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

infill for FORD FOCUS MK2 CENTER CONSOLE STORAGE

0 downloads153 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Infill for FORD FOCUS MK2 CENTER CONSOLE STORAGE There is two models. First is full block - so use boolean to modified it for your needs. The second one is my example how I use it like a socket holder there is a small gap between so I used 3mm floor XPS (or mirelon or some rubber) to fill it and the 3d printed part is firmly inserted. Attention!!! Inside the car, is dangerous of high temperatures, therefore use only filaments with high heat resistance. PLA or PETG has softened and deformed. I have used HIPS now and so far it is good.