Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Focus MK3 Facelift (2014-2018) central tunnel pushbutton holder
Shared by
3DPrintedCarPartDescription
I needed a pushbutton support for my gate remote controller, so I created one. The support slides nicely in the central tunnel rail where the shutter runs, and fits perfectly together with it. I uploaded two versions, one with a slot (if it is required to pass a wire to the outside) and one without it. The central hole in the support fits 19 mm pushbuttons like this: https://www.banggood.com/12V-19mm-Momentary-Push-Button-Switch-Waterproof-Switch-p-1100225.html edit 2020-04-10: added version without hole ### Print Settings --------------------------------------- Printer: Anet A8 Supports: Not required Resolution: 0.2 Infill: 20
Originally published on thingiverse.com by Sgna Blo (sgnablo) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
